8 Best Car Subwoofers Under $200 – Ultimate Guide 2021

Most music lovers including me don’t listen to music if the bass isn’t there. This is where the subwoofers come in to help us get the best sound.

According to the Car Audio City, “A proper high quality car stereo with a subwoofer creates audio perfection.”

Now subwoofers are quite difficult to find. Some are good but are expensive while some are not good at cheap prices. When you’re completely stuck. We’re here to help you by reviewing some of the best car subwoofers under $200. So let’s see what we have today!

Rockford Fosgate P3D4-12

12-inch
600 Watts RMS
1200 Watts Peak
Impedance: 4 Ohm

MTX Audio Terminator Series TNE212D

12-inch
400 Watts RMS
800 Watts Peak
Impedance: 2 Ohm
Frequency response: 10Hz - 150Hz

Pioneer TS-A300D4

12-inch
500 Watts RMS
1500 Watts Peak
Impedance: dual 4 ohms
Frequency Range: 20 Hz to 2.3 kHz

Skar Audio EVL-12

12-inch
1250 Watts RMS
2500 Watts Peak
Impedance: dual 2 ohms
Frequency Range: 25 Hz - 250 Hz

Kicker 10″ 600 Watt

10-inch
200 Watts RMS
800 Watts Peak
Impedance: 2 ohms
Frequency Range: 20Hz - 150Hz

Rockford Fosgate introduced this subwoofer with strong and high adjustability. It’s a powerful, affordable, and lightweight subwoofer that can add extra bass to your car audio system.

Having a maximum power handling of RMS 600 watts and a Peak of 1200 watts, this subwoofer delivers the best sound quality with the perfect bass. It has a custom 10 AWG nickel-plated terminal which is completely rust-free and waterproof.

It is a 12-inch subwoofer with an impedance of 4 ohms covered with anodized aluminum cones and dust caps with a unique and new venting design.

The all-new Flex fit basket allows the fine-tuning of the subwoofer’s mounting area. All these materials keep the motors in the sub-woofer cool with zero noise distortion. With the help of the spider venting design, it has less volume to vibrate, decreasing the noise distortion and failure of the subwoofer.
Like all other Rockford Fosgate speakers, this best 12-inch subwoofer features the VAST (Vertical Attach Surround Technique), which helps the sub push more air and increases the subwoofers cone area by 25%.

Furthermore, you can increase or decrease the bass easily. It works well in a sealed enclosure, so you don’t need to worry about the adjustment of the bass. It comes with a high temp voice coil, which increases the quality of the subwoofer and increases the quality of the bass.

The MTX TNE212D features dual boxes for subwoofers of 12 inches each. It has a frequency response of 10Hz to 150Hz, which is ideal for a good subwoofer under $200. The sound clarity delivered by this subwoofer is 37 hertz.

It has an excellent build quality; it comprises a pure MDF (medium density fiberboard) with a sleek look. Covered with a polypropylene cone and a rubber surround, it maintains the durability and a distortion-free bass coming out from it.

It also makes the subwoofer incredibly lightweight. Besides, it is also covered with a 2-inch aluminum foil. Both materials are widely known in subwoofers, so you don’t have to worry about them.

Moreover, this MTX TNE212D has a maximum power handling of 1200 which means 800 watts Peak and 400 watts RMS. The impedance is 2 ohms for this subwoofer which is very rare. Most subwoofers having an impedance of 2 ohms are expensive.

This Pioneer subwoofer is a single one with a maximum power handling of 1500 Watts, 400 RMS. Being the most highly rated product, it delivers the best bass, which is powerful and loud and clear.

What I like the most about this subwoofer is the sound clarity; it produces high sound clarity of 1 kHz. It has a top-mount depth of 5.8 inches, which can be easily installed in a sealed or ported enclosure. You can also get a pair of this subwoofer to make a heavy bass tube for your car.

Furthermore, it features an 88dB sensitivity which is quite good for the best budget subwoofer. Higher the sensitivity, the less power it will require to reach a high output level. In simple words, if a subwoofer has a sensitivity of 80 to 100dB, it will sound much louder.

The 4-ohm single voice coil allows you to install this subwoofer without any problem. It is covered with a glass fibre and Mica Reinforced IMPP (interlaced injection molded polypropylene) cone. With the rubber surround, it delivers the perfect bass with zero noise distortion.

The Skar Audio EVL-12 is covered with a 3-inch dual 2-ohm voice coil with a black coating. It features a competition-grade paper cone covered around the subwoofer to protect it against failures or explosions. With the High roll foam surround, it is said to be lightweight and distortion-free.Besides, it is protected by the EVL series signature red two-layer spider.

This subwoofer can handle a Peak of 2500 watts and RMS 1250 watts RMS. Besides, it is extremely responsive with a sensitivity of 85.1dB. The bass delivered by this subwoofer is intense and low and doesn’t hit directly in your ears. With a frequency response range 25Hz to 250Hz, this subwoofer stands out in the market.

Its advanced cooling design allows the subwoofer to produce loud and excellent bass without overheating. The cooling system outputs the best bass while remaining cool at the same time.

Now we have the Rockville RW10C; Rockville is also making fantastic car audio products. However, this time they have made a very modern subwoofer. Let’s check out more about it.

It is powered with an adjustable input sensitivity which means you can adjust the sensitivity as you like. It comes with a soft remote that helps you turn it on and control the bass and sensitivity.

The power output is 800 watts and RMS 200 watts. The maximum sensitivity for this subwoofer is 90dB. Besides, this subwoofer is integrated with a thermal and short circuit protection circuit. Also, it contains low-level RCA inputs and high-level inputs with auto turn-on technology.

Moreover, Rockville has made it very easy to install. The last two features which are the most favorite of people are the low pass filter and the bass boost. The low pass filter has a frequency of 50Hz – 150Hz, which lets you adjust the frequency for left and right speakers. While the bass boost makes it even louder, some say it distorts if you use it too much.

Kicker having a famous name is building unique car audio products for many years; They are known for their quality and affordable prices.

This kicker 10” subwoofer comes pre-installed in a 4 ohm thin vented subwoofer enclosure, which is relatively small and can easily be put in your car’s trunk, even if you have a small car.

The maximum power handling for it is 600 watts and RMS 300 watts. The most liked feature of this subwoofer is that it has 93.8dB sensitivity. The enclosure gives you complete surety of not exploding. It is made up of MDF which is mostly used in all other affordable subwoofers.

It is covered with a polypropylene cone. These materials impact the subwoofer a lot and also make it lightweight and distortion-free.

Moreover, It is equipped with venting slots that allow the air to pass through, maintaining the temperature of the subwoofer. It is effortless to install; you need to install some wires with the subwoofer. Unfortunately, this subwoofer doesn’t come with an amplifier, so you need to buy it along with the subwoofer.

If you’re looking for some good quality car subwoofer that provides you with the perfect bass, this JBL GT-Bass Pro 12 is made for you. JBL, as you already, has its level when it comes to car speakers.

It is equipped with a 12-inch subwoofer which is covered with a die-cast aluminum basket. It comes with a polypropylene cone, reducing distortion and making the subwoofer powerful enough to outlast in your car.

Moreover, the slipstream port eliminates port noise, giving you a distortion-free sound even at higher outputs. With this subwoofer, you don’t even need to install an amplifier as it is already integrated with a built-in RMS 150-watt amplifier. 

It comes with a vented pole piece that doesn’t let the subwoofer’s motors overheat. It helps the subwoofer cool down faster with improved and lower power handlings.

At last, this JBL subwoofer is powered by a remote. You don’t need to stop the car in the middle of a drive to adjust the bass; you can increase or decrease the bass from your car seat.

This 12-inch subwoofer in a ported black box is covered with a polypropylene cone which is quite strong and lightweight. It helps the subwoofer provide accurate mids and low notes for improved sound quality.

Moreover, the whole package includes a monoblock amplifier with an amp wire kit. This subwoofer handles the power at 1200 Watts peak and 600 RMS. Finding a high-quality subwoofer with low power handling is quite difficult.

They have given the range of high-level inputs and RCA connections that can run easily with the amp. You can connect high-end head units or speakers to the amp without any issue.

Best Car Subwoofers Under $200: Buying Guide

Don’t have any idea about the things to consider before buying a subwoofer? Don’t worry we have compiled a complete buying guide to help you further. 

Power Output/handling

There are two kinds of power outputs. One is Peak or total power output, and the other one is RMS. So between these two power outputs, it’s better to focus on RMS Power output rather than Peak.

The difference between these two is that RMS watts are the steady power outputs that are much easier to measure, while Peak watts estimate the power output that is difficult to measure. Do check the power rating of both the sub and the amp when buying a subwoofer for your car.

Impedance

The impedance varies from 2 ohms to 8 ohms, but most subwoofers have an impedance of 4 ohms. So it’s better to buy a subwoofer with 2 ohms, 8 ohms or even 4 ohms. If you need to install an amplifier with the subwoofer, you must check the impedance.

Sensitivity

Higher the sensitivity, the better the subwoofer. If a subwoofer has a high sensitivity, that means it would need less power. Thus if you go for a subwoofer with low sensitivity, it would require a lot more energy.

Size

The size completely depends on you, it’s your choice whether you need a large subwoofer or small. The largest size that you could get for a subwoofer is 12 inches. While the smallest one you could get for a subwoofer is 8 inches. Yet I recommend you to go for a subwoofer which varies around 10 to 12 inches. Don’t forget, these sizes are for the subwoofer, not the enclosure. Many people mix up subwoofers with their enclosures.

Number of voice coils

Most subwoofers in our guide contain dual voice coils. Dual voice coils are a better and popular option to have in a subwoofer. Some old subwoofers have a single voice coil. However, you should go for dual voice coils.

Leave a Comment